Merek
Spesial Produk
FUTABA 4PX 2.4GHz 4-Channel Computer Radio System with 2 Receivers
Rp 7.000.000
Rp 6.750.000
GQ 1:10 Touring Car Foam Tyre Rear 30mm Shore 40
Rp 100.000
Rp 75.000
GQ 1:10 Touring Car Foam Tyre Rear 30mm Shore 42
Rp 100.000
Rp 75.000
GQ Silicone Exhaust Gasket .15 (2)
Rp 40.000
Rp 36.000
GQ Truggy Tire B-Medium Insert  "HAMMER" (2)
Rp 190.000
Rp 175.000
HB Racing E817 1/8 Off-Road Electric Buggy Kit
Rp 7.500.000
Rp 7.300.000
HB204124/ D817 1/8 Competition Nitro Buggy Kit
Rp 7.500.000
Rp 7.300.000
Hyperion EOS 0720i Super DUO3 charger - 2 x 1S-7S, 20A max, 1000W
Rp 3.925.000
Rp 3.532.500
MEGA ABC Set ZX21 DSII+EM
Rp 2.400.000
Rp 1.920.000
MEGA ABC Set ZX21 DSIII+EM
Rp 2.600.000
Rp 2.080.000
MEGA ABC Set ZX21 Offroad
Rp 1.635.000
Rp 1.100.000
MEGA ZX21 DSIII EM
Rp 5.850.000
Rp 3.510.000
PROLINE Interco TSL SX Super Swamper XL 1.9" G8 Rock Terrain Truck Tires (4)
Rp 750.000
Rp 695.000
PROLINE PowerStroke Scaler Shocks 90mm-95mm (2)
Rp 780.000
Rp 725.000
RPM 6x15x5mm Knuckle / Steering Block Oversized Bearings (4)
Rp 324.000
Rp 162.000
Sanwa MX-V 3-Channel 2.4GHz F.H.S.S.-2 Surface Radio System
Rp 1.500.000
Rp 1.400.000
SANWA RX-471W 2.4GHz FHSS4/FHSS3  4 Channel Waterproof Receiver
Rp 1.350.000
Rp 1.250.000
SERPENT Chassis alu 7075 T6 966
Rp 1.420.000
Rp 1.136.000
SERPENT Chassis S960
Rp 1.240.000
Rp 992.000
SERPENT S411 1/10th 190mm Electric Car Kit
Rp 4.700.000
Rp 4.500.000
SKYRC NC2500 AA/AAA Battery Charger Analyzer
Rp 1.250.000
Rp 1.100.000
SWEEP RACING 1:8 Buggy Dish Wheel Zero Offset V3 White 4pcs
Rp 150.000
Rp 135.000
TEAM MAGIC .12 Rear Exhaust Engine for G4JR
Rp 1.500.000
Rp 1.350.000
Pencarian
Belanja Anda
0 item
Member Login
E-Mail Address:


Password:

Lupa Password »
Daftar Member »
Produk Promo
VP PowerMaster RC Pro Race 25% Car Fuel
Rp 450.000
VP PowerMaster RC Pro Race 30% Car Fuel
Rp 500.000
VP PowerMaster Master Basher 20% Car Fuel
Rp 425.000
Sanwa ERS-962 - Digital High Voltage Waterproof Servo 25.3kg / 0.11sec / 62g
Rp 1.135.000
INTELLECT IP Lipo Receiver Battery 2400mAh 7.4V Flat Pack
Rp 410.000
INTELLECT IP Lipo Receiver Battery 2700mAh 7.4V  Hump Pack
Rp 410.000
INTELLECT IP Battery 6.6V 1600mah Receiver Flat Pack
Rp 410.000
INTELLECT Battery 6.6V 1900mah Receiver Hump Pack
Rp 410.000
SAVOX SV-1271SG Digital Steel Gear Servo (High Voltage)
Rp 1.050.000
SAVOX SB-2274SG High Voltage High Speed Brushless Steel Gear Digital Servo
Rp 1.500.000
SAVOX SV-1270TG High Voltage Monster Torque Titanium Gear Digital Servo
Rp 1.150.000
OS 21XZ-B V2 Off-Road Competition Buggy Engine
Rp 2.750.000
Power HD Metal Gear Analog Servo 0.14sec 17kg-cm
Rp 220.000
TORNADO Model Racing Car Fuel 25% 4 Liter
Rp 450.000
INTELLECT NimH RX Battery Hump Pack 1600mAh 2/3A 6V
Rp 245.000
SANWA HVS-702 Low Profile HV Digital Servo
Rp 700.000
VP Powermaster Nitro Race 16% Touring Car Fuel
Rp 400.000
Power HD DW25LV Waterproof Super Torque Digital Servo 0.13sec 25kg-cm
Rp 1.000.000
Power HD Waterproof Super Torque Digital Servo 0.16sec 20kg-cm
Rp 400.000
Power HD B4 HV Brushless Digital Servo 0.085sec 25kg-cm
Rp 1.050.000
Power HD B5 HV Brushless Digital Servo 0.066sec 20kg-cm
Rp 1.050.000
VP PowerMaster Nitro Race Tessmann 25% Car Fuel
Rp 475.000
NITROLUX Off Road Nitro Fuel 25% (5L)
Rp 600.000


SERPENT S411 1/10th 190mm Electric Car Kit

SERPENT S411 1/10th 190mm Electric Car Kit
Harga Rp 4.700.000 Rp 4.500.000
Persediaan Ada
Kode #SER-400005
Berat Barang 3.00 Kilogram
Merk SERPENT

Jumlah Add to Cart
SERPENT S411 1/10th 190mm Electric Car Kit
SERPENT S411 1/10th 190mm Electric Car Kit
SERPENT S411 1/10th 190mm Electric Car Kit
SERPENT S411 1/10th 190mm Electric Car Kit
SERPENT S411 1/10th 190mm Electric Car Kit
SERPENT S411 1/10th 190mm Electric Car Kit
SERPENT S411 1/10th 190mm Electric Car Kit
SERPENT S411 1/10th 190mm Electric Car Kit
SERPENT S411 1/10th 190mm Electric Car Kit
SERPENT S411 1/10th 190mm Electric Car Kit
SERPENT S411 1/10th 190mm Electric Car Kit
SERPENT S411 1/10th 190mm Electric Car Kit
SERPENT S411 1/10th 190mm Electric Car Kit
SERPENT S411 1/10th 190mm Electric Car Kit
SERPENT S411 1/10th 190mm Electric Car Kit
SERPENT S411 1/10th 190mm Electric Car Kit
SERPENT S411 1/10th 190mm Electric Car Kit
SERPENT S411 1/10th 190mm Electric Car Kit

Competition level 1/10th scale 190mm electric touring car chassis. The S411 is a very clean, narrow and sleek design with focus on easy handling, ease of set-up and maintenance. The 411 will put you into the winners circle in no-time.

S411 introduction
Serpent enters the competitive electric touring car market with the S411, which like all our previous cars, has been designed to win straight out of the box. Featuring an ultra low centre of gravity, optimized weight distribution, high performance geometry and top quality materials throughout, the S411 should see you in the winner’s circle in no time. In fact everything associated with this car is of the highest quality, from the packaging and supplied manuals, right through to the product and race support.

Anti-roll bars
The S411 is supplied with coded anti-roll bars front and rear with alu centering bracket. The anti-roll bars are available in a number of thicknesses and are connected to the wishbones using short adjustable track rods, connected with a pivot ball to the lower wishbones

C-hub front
A standard system on all high-end touring cars, the S411 features a front C-hub system, which is a lighter alternative to a pivot ball steering system. The car comes standard with a 4-degree caster block but is also supplied with a pair of 2 and 6-degree blocks. The C-hub is large enough to take out the drive-shaft assembly without dis-assembling the c-hubs.

Front suspension / rear suspension
Similar to the rear suspension in configuration, the front suspension sports a lower composite wishbone while the upper camber adjustment is handled using a track rod which is solid, lightweight and can easily handle impacts.

Gear differential
The kit version of the S411 comes supplied with a lightweight and smooth rear gear-differential. This supersmall differential can handle all the power of BL motors. Gear-diff can also be used on the front.

The newly designed ball-diff is optional

Rear section
The rear end of the S411 features strong 1-piece lower wishbones and composite. As with all the wishbones on the car, the lower wishbones can be used on both the left and right sides, minimizing the number of spare parts needed to bring to the track. The rear upright features a pivot pin mounting point on the bottom and 2 upper camber link mounting holes for fine-tuning camber rise.

Indentical
The front and rear end of the Serpent S411 are fully indentical and been designed for high performance and ease of maintenance. The rear bearing blocks have been designed in 2 pieces which allows the topside to be simply removed with 4 screws, giving you easy access to the differential for maintenance or adjustment. All the parts have been machined from aluminium and have anodized in gun metal grey.

Manual / decal / set-up sheet
To allow you to build your car with the greatest of ease, Serpent supplies a full colour instruction manual and integrated reference guide section that contains all the exploded views and latest options.
S411 decal sheets and set-up sheet are included too.
All Manuals are available to download as a PDF in the Download section of this product page.

Central section
The motorbracket is seperated fully from the aluminium mid-shaft brackets to isolate motor-vibrations better. The seperate machined brackets hold the light alumnium middle shaft/ 19T pulley. The holders feature seperate alu bearingholders, which give the best possible support to the mid-shaft section.

Shocks
The RCCX shock absorbers are very smooth and come pre-assembled. Machined from aluminium and unique in that the shock bodies only open on the bottom half, they are really simple to (re)assemble. The result is an ultra-smooth and air-free shock absorber thanks to the self-bleeding system incorporated into the design. The special X-shaped o-rings create a very smooth seal. The shocks are supplied with 4 different shock pistons. High quality race-springs included with color coding, grinded flat for even load.

Spool
The car comes supplied with a front spool which has been made from hard anodised aluminium while its shape has been optimised to ensure that the part is as light as possible without compromising strength. The drive is provided through the attached pulley into the lightened steel drive cups, which are held in place using steel pins.

Shocktowers
The Serpent S411 features 2.5mm thick carbon fibre shock towers on the front and rear of the car. Each tower sports many holes for adjustment of the shock absorber angle while the rear tower also acts as the mount for the rear body posts and the front tower accommodates a 3rd front body post.

Belts - drivetrain
The S411 features a 2-belt configuration with a long front and a short rear Kevlar reinforced belt that combied with precision moulded gears makes for a super smooth and free drive train.

Ball-bearings
The S411 is supplied with high-quality lightweight bearings throughout, making the drive train very efficient and allowing it to run very smoothly.

Bumper
The front bumper has been made from a high impact absorbing foam material and is shaped to protect the entire front end of the car in the event of a crash. The bumper is held in place with a large top-plate. The lower plate can be cut to the desired size and shape.

Steering assembly
The Serpent S411 utilises a centrally mounted ballraced dual pivot steering assembly-rack in aluminium. The steering assembly allows for very precise steering and great control.

Suspension brackets
For adjusting the cars toe-in and track-width, the S411 is equipped with separately mounted suspension brackets on both the front and rear of the car. Each bracket features an easily recognisable number that corresponds to the setting being used and due to the way they are mounted allows the user to easily and accurately adjust their cars settings. The brackets are designed such way that they can be used in any position in the car.

CVD's spring-steel
This car is supplied with a complete set of 4 high quality hard coated spring-steel CVD shafts, which are a highly consistent, efficient and durable way to transfer all the power the surface.

Chassisplate
The very narrow chassis plate has been machined from a plate of 2.5mm thick carbon fibre, which creates a perfect platform for the cars electronics as well as stiff structure, especially when combined with the equally rigid 2.5mm thick carbon fibre top deck. All holes in the base of the chassis have been countersunk while on the top of the plate, the area around the motor has been milled down to allow it to sit as low as possible. The chassis further features extra holes to mount weights and narrow slits to guide the battery-tape.

Battery-stays
The battery pack is kept in place by 2 mounts on the centreline of the car, and 2 special nylon mounts with slits to mount the glass-tape. The mounts can be reverted to move the battery more forward or backwards.

Set-up
Ackermann: two positions on the steering blocks
Camber: adjustable front and rear
Toe-in: adjustable front and rear
Front Caster: 4° static ( 0°, 2° or 6° as optional )
Downstops: adjustable front and rear
Front anti-dive: adjustable range 0° to 3°
Rear anti-squat: adjustable range 0° to 3°
Anti-roll bars: 1.4mm front and 1.4mm rear

Concepts: Harald Hergarten / Michael Salven
Design: Michael Salven

Packing
The S411 kit comes without tyres/wheel/spurgear and electronics.

The S411 is packed in a very small strong box with nice graphics, which can be re-used as parts or tyre box lateron.

The box contains bags which are numbered in same sequence as steps in the manual.

Team Serpent
Team Serpent will keep you up-to-date on news, racing and set-ups in this site, and through Twitter, Facebook and the Serpent.com webpages.

Enjoy racing Serpent 411 !

Specifications

Class            : 1/10th scale 190mm Electric
Purpose          : 190mm Competition touring car
Chassis          : 2.5mm carbon fibre, CNC machined
Suspension       : Front C-Hub suspension system
Rear axle        : Rear gear- differential
Front axle       : Front spool
Drive system     : 4wd through 2 kevlar reinforced timing belts
Shock absorbers  : RCCX shock absorbers
Wheel base       : 254mm +/- 4mm
Track-width front: 190mm /- 6mm
Track-width rear : 190mm /- 6mm
Adjustability    : Camber, Caster, Down-stops, Up-stops, Toe-in, Track width & Roll Centre         
Not included     : Motor, Battery, Speed Controller, Servo, Tires, Body, Radio equipment.              

 

Silahkan Tulis Review Anda:
Nama Anda


Review Anda Catatan: Kode HTML Tidak Diperbolehkan!

Rating Kurang Bagus            Sangat Bagus

Masukkan kode di dalam kotak di bawah ini

Kata kunci: s411, serpent,