Merek
Spesial Produk
GQ Silicone Exhaust Gasket .15 (2)
Rp 40.000
Rp 36.000
MEGA ABC Set ZX21 DSII+EM
Rp 2.400.000
Rp 1.920.000
MEGA ABC Set ZX21 DSIII+EM
Rp 2.600.000
Rp 2.080.000
MEGA ABC Set ZX21 Offroad
Rp 1.635.000
Rp 1.100.000
MEGA ZX21 DSIII EM
Rp 5.850.000
Rp 3.510.000
RPM 6x15x5mm Knuckle / Steering Block Oversized Bearings (4)
Rp 324.000
Rp 162.000
SERPENT Chassis alu 7075 T6 966
Rp 1.420.000
Rp 1.136.000
SERPENT Chassis S960
Rp 1.240.000
Rp 992.000
SERPENT S411 1/10th 190mm Electric Car Kit
Rp 4.700.000
Rp 4.500.000
SWEEP RACING 1:8 Buggy Dish Wheel Zero Offset V3 White 4pcs
Rp 150.000
Rp 135.000
Pencarian
Belanja Anda
0 item
Member Login
E-Mail Address:


Password:

Lupa Password »
Daftar Member »


HUDY Chassis Droop Gauge Support Blocks 30mm 1/8 Off-Road - LW (2)

HUDY Chassis Droop Gauge Support Blocks 30mm 1/8 Off-Road - LW (2)
Harga Rp 367.500
Persediaan Ada
Kode #HUD-107704
Berat Barang 200.00 Gram
Merk HUDY

Jumlah Add to Cart

Lightweight chassis droop gauge support blocks are a “must have” set-up tool for every off-road or truggy racer. The aluminum frame is CNC machined and drilled for super lightweight design and exact the size guarantees accurate & precise downstop measurements.

Proper chassis droop is a critical yet frequently overlooked set-up feature of modern 1/8 off-road cars and truggies. It is essential for proper handling to achieve balanced down-travel on each side of the suspension and as such HUDY is the first RC company to develop and produce the first purposefully-designed 1/8 off-road large-size droop gauge support blocks.

click to enlarge

 
 

 

 
Using the support blocks is simplicity itself. Remove the tires from the buggy and using flat HUDY Set-up Board #108202 place the chassis on the support blocks; place the front support block below the servo saver, and place the rear support block below the rear suspension mounting. Using the #107717 Chassis Ride Height & Droop Gauge 0 to -13 mm for 1/8 Off-Road with elevated scales, measure the droop under the wheel axle hex. Use the downstop screws to alter the suspension droop on each side of the car; the shocks should extend out far enough that they do not limit the suspension arm movement. Ensuring equal and proper suspension droop will allow the car to achieve a proper traction level and weight transfer depending on track conditions. Please refer to your buggy’s (or truggy’s) set-up book to learn more about droop adjustment.
Silahkan Tulis Review Anda:
Nama Anda


Review Anda Catatan: Kode HTML Tidak Diperbolehkan!

Rating Kurang Bagus            Sangat Bagus

Masukkan kode di dalam kotak di bawah ini

Kata kunci: block, hudy, support,